The LCD keypad includes 9 lights and a 32-character liquid crystal display and a built-in electronic sounder. The system must always be Disarmed using a 4 or 6 digit code. If your Security Control has been so programmed, you may be able to turn on (ARM) your System by simply pressing the or key. The SECURITY CONTROL can be turned on (ARMED) and off (DISARMED) by entering a 4 or 6 digit code into the Keypad Control, which is similar to a telephone keypad. READ THE ENTIRE MANUAL AND, IF POSSIBLE, PRACTICE ON THE KEYPAD CONTROL WHILE YOUR PROFESSIONAL INSTALLER IS ON SITE. IF YOU DO NOT UNDERSTAND ANY PART OF THIS MANUAL, YOU SHOULD NOTIFY YOUR INSTALLING COMPANY. THIS BOOKLET SHOULD BE KEPT IN AN ACCESSIBLE LOCATION FOR THE LIFE OF THE SECURITY SYSTEM. FAILURE TO DO SO COULD RESULT IN THE SECURITY SYSTEM NOT WORKING PROPERLY. ALL USERS OF YOUR SECURITY SYSTEM SHOULD READ AND FOLLOW THE INSTRUCTIONS AND PRECAUTIONS IN THIS BOOKLET. THIS MANUAL IS FURNISHED TO HELP YOU UNDERSTAND YOUR SECURITY SYSTEM AND BECOME PROFICIENT IN ITS OPERATION. ĭISPLAYS IN THE PARTITIONING MASTER MODE. ĪDJUSTING THE VIEW / BRIGHTNESS OF THE LCD. ĬHANGE LANGUAGES.ĬHANGING USER CODES.ĪSSIGNING USER CODE AUTHORITY LEVELS. UNBYPASSING.ĮMERGENCY ACTIVATION KEYS.įUNCTION MENU. ĬHANGING MODES WHILE YOUR SYSTEM IS ARMED.ĭISARMING YOUR SYSTEM. MAKING YOUR SYSTEM READY TO ARM.ĪRMING YOUR SYSTEM IN THE “ STAY” MODE. KEYPAD FUNCTIONS.ĪRMING YOUR SYSTEM IN THE “ AWAY” MODE. 60ĬOMMUNICATOR CODES FOR SLOW SPEED FORMATS ONLY. SETUP FOR AUTO-TEST, AUTO-ARM AND OPENING/CLOSING TIMES. ZONE CONFIGURATIONS AND PARTITION SELECTION. 44įEATURE AND REPORT SELECTIONS (FOR PARTITION 1).
33ĭISABLING TAMPER ALARMS IN PROGRAM MODE. PROGRAMMING THE NX-8 CONTROL PANEL VIA LCD KEYPAD. PROGRAMMING THE NX-8 CONTROL PANEL VIA THE LED KEYPAD. KEYPAD FUNCTIONS FOR THE NX-148 LCD KEYPAD. NX-8-EUR Installation manual 02/07/06ĬONTENTS.
0 kommentar(er)
